Clear-Com HLI-FBS - Manual (Page 15)

N
All Talk. Press to talk to all channels (intercom devices and systems) connected to the
main station.
O
USB 2.0 (Micro-AB) connector. For software upgrades
(see 5.7.2 Updating the software and 5.7.5 Saving and restoring the software
settings.).
P
USB 2.0 (Standard-A) connector. For software upgrades
(see 5.7.2 Updating the software and 5.7.5 Saving and restoring the software
settings.).
Table 4: Key to HMS-4X Main Station front panel diagram
Important note:
The HMS-4X Main Station does not have a power switch, button or key. The system powers up when you
connect the power supply. Power up takes 15-20 seconds (depending on the number of beltpacks
connected).
2.1.1 HMS-4X Main Station front panel: Channel keyset
Figure 3: HMX-4 Main Station (Front panel): Keyset
15 HelixNet Partyline User Guide