beautypg.com

Installation, cont’d – Extron Electronics ISM 824 User Manual

Page 32

background image

Installation, cont’d

ISM 824 Integration Scaling Multiswitcher • Installation

2-10

N

If the device does not recognize a newly installed board, power the unit down,

remove the board and re-install, closely following steps 4 through 7 above.

If it continues to not recognize the board, contact Extron HelpLine (see rear
cover).

8

.

Connect output devices to the video and audio connectors on the rear of the

newly installed boards and power up the devices.

9

.

Power up the input devices and create the desired ties, following the steps

given in

chapter 3, “Operation and Setup”

.

10

. Configure the ISM 824 with the new boards, following the steps given in

chapter 3, “Operation and Setup”

. Also see c

hapter 4, ”SIS Programming and

Control”

,

chapter 5, “ISM 824 Multiswitcher Software”

, and

chapter 6, ”HTML

Operation”

, for alternative methods in configuring the multiswitcher.