EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 90)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
81
10.4 ASSIGNING KEYWORDS USING THE
REMOTE PANEL
10.4.1 K
EYWORD
S
ETTINGS
A keywords file must be selected in the Setup to enable the keyword
assignment functions on the EVS Remote Panel.
• In the Setup menu of the remote, the operator can choose between 2
different keyword modes: “List” (default) or “Numeric”.
• In LIST mode, the list of keywords will appear on the LCD display by
group of 8 keywords, and the operator can select the keyword by
pressing the corresponding F_ key. The advantage is that the keywords
are visible to the operator, but this mode can be slow if he has to browse
through a long list of keywords.
• In NUMERIC mode, the list of keywords is not visible on the LCD display,
and the operator selects a keyword by entering its position in the list
with the F_ keys. He can know the position either from a hardcopy of the
keywords list, or by looking at one of the VGA Keywords screens, or still
from his memory... This mode is faster to operate, but in most cases the
operator will need to have the complete list of keywords available next to
him.
10.4.2 A
SSIGNING
K
EYWORDS IN
L
IST
M
ODE
To assign keywords to a clip in list mode, recall the clip, then press MENU
to access the secondary clip menu on the Remote Panel.
The LCD display a page containing 8 keywords. Press F9/F10 to access the
previous/next keywords page. To assign a keyword to the current clip, press
the F_ key corresponding to the desired keyword on the LCD display.
Depending on the CLIP/CAM mode defined by the D key, the selected
keyword will be assigned only to the camera angles loaded on the channels
fully controlled by the operator at that time (CAM mode), or to all camera
angles of the clip (CLIP mode). The keyword will be assigned to the first
available keyword location on the 1
s t line of the LCD display. If the Keyword
1 player_B10123 2 action_689012 3 keyword89012
F1:action_1 F6:action_6
F2:action_2 F7:action_7
111A
F3:action_3 F8:action_8
F4:action_4 F9:Prev.page
p.01
F5:action_5 F0:Next page
Push Aux Clip Sort->TC Post-Roll
>Archive *** Name Cam