EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 51)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
42
4. Select the COPY or MOVE function by pressing the A or B key.
The corresponding function will be highlighted on the LCD and the
message on the OSD will be updated accordingly.
5. Select the CLIP or CAM mode with the D key.
See Section “Settings on Copy/Move Clips” below.
6. In case of network copy, select the SHORT or LONG mode with the C
key.
See Section “Settings on Copy/Move Clips” below.
7. Press ENTER to confirm or MENU to cancel.
When doing a network copy, the VGA displays the % copied of each clip.
9.2.7.2 S
ETTINGS ON
C
OPY
/M
OVE
C
LIPS
When you copy/move a clip, two settings are available to specify how the
clip should be copied or moved:
Clip Mode/Cam Mode
Pressing the D key in the Copy/Move LCD window allows the user to select a
value for this setting:
• CLIP mode: all camera angles of the clips will be copied/moved.
• CAM mode: only the camera angles of the clip loaded on the controlled
channels will be copied/moved.
Short/Long Mode
This option is only available for a network copy, not for a local copy or for a
move.
Pressing the C key in the Copy/Move LCD window allows the user to select a
value for this setting:
• SHORT mode: only the material between the Short IN and Short OUT
points of the original clip, augmented by the duration of the guardbands
defined on the destination system, will be copied.
• LONG mode: the entire original clip, including its guardbands, will be
copied to the destination system. Copying a clip on the same machine as
the original, or moving a clip, is always done in LONG mode.
Default Settings
The default settings for the COPY/MOVE menu are: COPY, SHORT, CLIP. If
the operator changes these settings, the new settings will be re-used the
next time this menu is called. The default settings will be automatically
restored when starting a new Multicam session.
9.2.7.3 A
BOUT
C
OPIED
C
LIPS
Copying a clip gives a new clip which is totally independent from the
original. It can therefore be trimmed, named, deleted, etc. without affecting
the original.
Copying clips on the same server does not duplicate the original material on