EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 42)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
33
Practical example
The operator builds a playlist with Fills and another playlist with Keys. He
sets the “Playlist Load” parameter to “Conditional” in the setup menu, then
enters the 2PGM mode, selects the Fills playlist as current playlist, presses
A to gain control on PGM1, presses PLST two or three times to enter the
PLST DIFF mode and cue up the Fills playlist to its 1st clip. Then he presses
the TAKE key to return to the PGM selection menu, selects the Keys playlist
as current playlist, presses B to gain control on PGM2, presses PLST two or
three times to enter the PLST DIFF mode and cue up the Keys playlist to its
1st clip. Then he presses the TAKE key to return to the PGM selection
menu, presses D to gain control on both PGM channels, then presses TAKE
to enter the PLST DIFF menu. He will see on the LCD screen the content of
both playlists side by side, and can browse them or play them in Sync at any
speed, and perform SKIP and NEXT commands as needed.