EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 122)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
113
11.12.7 S
ETTING THE
D
EFAULT
M
ODE FOR
E
XTENDING A
T
RANSITION
Whenever you make a video or audio split, the transition originally set is
changed, which means extended on either or both sides of the transition
boundaries. In the Setup menu, page 4.2, key F2, you can set the default
mode for extending transition effects, this means you specify where the
effect is extended.
T
RANSITION
M
ODES
The following table summarizes the various transition modes;
Criteria Description
Center (on)
Cut The transition is extended equally in both directions.
End (on) Cut The transition is extended to the left, so that the end of
the transition is not changed.
Start (on) Cut The transition is extended to the right, so that the start of
the transition is not changed.
Ask Asks the operator to choose one of the 3 options above
each time he edits a transition.
P
OSSIBLE
C
ASES
You can build different types of playlists depending on:
• the transition mode in video or audio split
• the transition duration
The following schemas show, for each transition mode, a playlist with:
• the same video and audio transitions (no audio or video split)
on playlists 10, 13 and 16.
• an extended audio transition (V Base edit)
on playlists 11, 14 and 17.
• an extended video transition (A Base edit)
on playlists 12, 15 and 18.