13 moving and copying clips and playlists, 1 general principles, Clips – EVS MulticamLSM Version 10.01 - July 2009 Operating Manual User Manual

Page 69: Playlists, 2 clipboard field, 3 ctl+ x: cut, Howtomoveclips, 13 m, 3 ctl

Issue
10.01.F

EVS Multicam Version 10.01 – Operating Manual

EVS Broadcast Equipment SA – July 2009

9.3.13

OVING AND

OPYING

LIPS AND

LAYLISTS

Copying and moving clips and playlists in the VGA are performed using the

CUT, COPY and PASTE functions.

9.3.13.1

ENERAL

RINCIPLES

LIPS

• If the clip board was filled using the Cut function, the original clip(s)

is/are deleted after being pasted to the new location.

• In CAM mode, only the selected camera of the clip is

Cut/Copied/Pasted. In CLIP mode, all camera angles of the clip are
Cut/Copied.

• For the Paste function in CLIP mode, only the available camera locations

inside the destination clip will be pasted. If some camera angles already

exist for the destination clip, these will not be overwritten by the
corresponding camera in the clipboard.

• A “Cut & Paste” of a clip is equivalent to a “Move Clip”, meaning that

any reference to that clip inside playlists will be updated to the new
location of that clip. This is not the case when doing a “Copy & Paste”,

then deleting manually the original clip.

LAYLISTS

• Playlist can only be pasted to local playlist locations. It means that

network playlists can only be copied by “pulling” them from the remote
machine to the local machine.

• Copying a playlist using the Cut/Copy/Paste functions from the Clip

screen will only copy the “EDL” (i.e. the list of clips) but the clips
themselves will remain in their original location. If the operator wishes to
create a local copy of all network clips contained in the playlist, the copy
of the playlist must be performed from the EVS Remote Panel. Refer to

the Chapter 11 ‘Playlist Management’, on page 86 for further details.

9.3.13.2

LIPBOARD

IELD

This area displays the content of the clipboard: clip/playlist number, network
number if the copied clip/playlist is a remote clip/playlist, and the selected
camera(s) for a clip.

The rest of the line summarize the available functions (copy, cut, paste,
delete) and their keyboard shortcuts. These functions can also be called by

clicking on the corresponding area on this line.

9.3.13.3

CTL+

CUT

1. Move the cursor to the clip/playlist to “cut” from the Clip screen

2. Press CTRL + X on the keyboard or click on the corresponding area on

the screen.