EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 105)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
96
11.6.2 H
OW TO
N
AME THE
C
URRENT
P
LAYLIST ON THE
VGA P
LAYLIST
S
CREEN
To name the current playlist from the VGA Playlist screen, proceed as
follows:
1. Press the F10 key on the keyboard to open the VGA Playlist screen.
The current playlist is displayed.
2. Type the desired name on the keyboard.
It appears in the Name field at the bottom of the screen. Use
to delete the last character, or ESC to clear the entire
field.
3. Press SHIFT+F1 to assign the new name to the current playlist.
The playlist name will appear in the title bar next to the playlist number.
11.6.3 H
OW TO
N
AME THE
C
URRENT
E
LEMENT IN THE
L
OADED
P
LAYLIST
Note
Naming the current element of the loaded playlist will affect the
original clips.
This function is only available when the playlist is active in Playlist Edit
mode (PLST EDIT) or Playlist Diffusion mode (PLST DIFF) on the EVS
Remote Panel.
To name the current element in the loaded playlist from the VGA Playlist
screen, proceed as follows:
1. Press the F10 key on the keyboard to open the VGA Playlist screen.
The loaded playlist is displayed and the current playlist element on the
Remote Panel is selected.
2. Type the desired name for the element on the keyboard.
It appears in the Name field at the bottom of the screen. Use
to delete the last character, or ESC to clear the entire
field.
3. Press F1 to assign the new name to the current element.
The name for the current element will appear in the Name column of the
selected element.