EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 13)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
4
1.2 CONFIGURATION ON LSM REMOTE
Before you start using the Multicam application in Multicam LSM mode, you
need to ensure that the parameters are properly defined in the Setup menu
of the Remote Panel, and in the Setup Configuration module of the Multicam
application. The new parameters are saved as soon as they are modified.
Important
Prior to using Multicam, the operator should enter the Setup menu
and set all necessary parameters. If clips are stored with certain
parameters and the operator wishes to change them afterwards,
those clips and playlists will not change. It is thus important to set
these parameters first.
The Multicam Configuration manual includes a detailed description of all
settings which can be defined on the Remote Panel.