EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 33)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
24
6. PGM-PRV Mode
6.1 1PGM+PRV (PRESS A FROM MAIN
MENU)
At least 2 playback channels must be available to run this configuration.
This mode allows the operator to make replays with/or without transition
effects between all outputs. A string of replays can be put together and
played back at the operator’s discretion.
The LCD display is divided in two menus controlled by soft keys (A,B,C,D).
To gain access to the upper menu, press MENU from the Remote Panel.
6.1.1 S
ECONDARY
M
ENU
Aud.Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
M
IX
/ W
IPE
L>R / W
IPE
R>L / W
IPE
U>D / W
IPE
D>U /
C
UT
These options determine the transition effect that will occur between the
PGM and PRV pictures. The mix, wipe and cut are on the same location.
Pressing this button will browse through these effects, showing the active
one on the LCD menu. Please refer to Setup menu to select the duration of
the transition effect.
PGM1 CAM A *PRV1* CAM B
Aud.Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
P.1
B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D