EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 38)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
29
6.2 FULL CONTROL AND LEVER
CONTROL
Controlling both PGM and PRV is done when PRV CTL (direct access key
from the remote) is not activated.
Once selecting PRV CTL the operator will have control of the PRV with the
jog dial and most buttons, while the lever and the Play button will control the
PGM output. At this point, selecting clips will call them up on the PRV side.
The combination of the PRV CTRL and the SW to IN functions allows the
operator to auto-chain cameras from the same IN point.
When an IN point has been marked, the operator activates the PRV CTL and
sets ON the SW to IN option. Then the slow motion of one camera can be
started from this IN point. The operator selects another camera in the PRV
output and, via the TAKE button, can auto-chain cameras from the same IN
point on the PGM output.