EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 113)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
104
then press ENTER to validate. Values are ‘Unknown’ and from 0 to 100%.
Operators have access to the secondary lever control like when clips are
replayed. While editing the speed of a clip, pressing SHIFT+Lever on the
Remote allows to access the secondary lever speed defined in the menu.
11.10.1.3 FX D
UR
The FX Dur function sets the duration of the transition effect. The default
value that initially appears is determined by the value set in the Setup menu.
The effect duration will affect the transition at the beginning of the selected
clip. Use the lever to adjust the value, then press ENTER to confirm.
11.10.1.4 E
FFECT
The Effect function is used to select the type of transition effect
(Mix/Wipe/Cut). Move the lever to set the type of effect, when Effect is
highlighted. Press ENTER to validate.
11.10.1.5 E
DIT
A
LL
Selecting this, followed by one of the playlist parameter option (speed,
effect, effect duration) will allow the operator to edit all clips in the list at
one time.
11.10.1.6 D
ELETE
The Delete function allows the operator to quickly edit a playlist by removing
the selected clip. The clip that has been «cut» can then be inserted into
another location. This clip is displayed on the second PRV output. To insert
it at another position in the playlist, simply go to that position using the jog
dial and press the INSERT key (or TAKE).
11.10.1.7 U
NDO
/R
EDO
This function is available from the secondary menu of the playlist, that is
accessed by pressing MENU in the Playlist Edit mode.
The last modifications of a playlist can be undone/redone for as long as the
operator does not exit the playlist mode (e.g.: returning to live).
Pressing the Undo command (D key) will undo the last modification. Up to 9
modifications can be undone. Once a modification has been undone, it is
possible to redo it by pressing the Redo key (C key).
11.10.1.8 M
AKE
L
OCAL
This function is available from the secondary menu of the playlist, that is
accessed by pressing MENU in the Playlist Edit mode.
This function offers the possibility to copy locally remote clips in a playlist.
In the playlist secondary menu, select on the B position MakeLoc.
When the function is called, the remote clips are replaced by short copies of
the local ones as soon as they are available.