EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 129)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
120
11.13 SWAP AUDIO TRACKS
11.13.1 I
NTRODUCTION
The swap audio tracks mode allows swapping audio tracks between two
points in a playlist.
In four tracks mode, the “auto” mode replaces audio tracks 1&2 by audio
tracks 3&4 in four audio mode. It replaces audio track 1 by audio track 2 in
stereo mode.
The manual mode lets you choose which tracks to replace.
Note
In 8 and 16 tracks mode, you only have access to the manual mode.
11.13.2 H
OW TO
E
NABLE THE
A
UDIO
S
WAP
M
ODE
To enable the Audio Swap mode, proceed as follows:
1. Enter the Setup menu.
2. Select the Swap Audio Tracks mode on page 4.2, F3.
3. Choose a value between “Auto” and “Manual”.
Please note that the Split Audio Editing has to be enabled in the Setup
menu on Page 4.2, F1. This option requires a specific licence code. If
that code is not installed on the server, this option can not be turned on.
11.13.3 H
OW TO
P
ERFORM A
S
WAP
A
UDIO
T
RACK IN
A
UTO
M
ODE
1. In Playlist Edit mode, select the Video Base mode (V Base). The LCD
screen will now display additional function:
2. Press the Swap button.
3. Jog your playlist until you reach the point where you want to change the
audio tracks. Mark an IN point.
The OSD screen indicates the following information:
PL11 LSM01 Paola LOC TDUR=00:00:02:22
111A/04
Clipname0123 00:00:29 Unk W00:10
112B Clipname4567 00:53:29 Unk W00:10
112B/02 Clipname8910 00:53:29 Unk W00:10
V Base A Base Swap
A Advanc A Delay A FX DUR A Split