EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 55)

Issue
10.01.F EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
46
9.2.11.2 P
USH
The Push function allows the operator to easily send a copy of a clip to
another machine on the network:
• If a default Push machine is defined in the setup, the clip will be
automatically sent to that machine.
• If no default PUSH machine is defined, the list of machines available on
the network will appear. As soon as the operator selects one of them,
the clip is pushed.
In both cases, a message appears for a few seconds on the LCD to confirm
that the clip is being pushed and indicating the clip location where it will be
stored on the receiving machine.
If the Receive Page(s) defined on the destination machine is (are) full, the
operator who tries pushing the clip is notified. While this message is being
displayed, the operator can press the MENU key at any time to return to the
normal menu. Depending on the CAM/CLIP mode selected by the D key, only
the camera angles loaded on the controlled channels are pushed (CAM
mode), or all camera angles of the clip are pushed at once (CLIP mode).
9.2.11.3 >A
RCHIVE
The Archive function allows the operator to flag a clip to place it in the
archive queue of the XFile
1 defined in the Setup menu (p.3.3 F1).
This function is blinking when the clip is flagged for archiving, but has not
yet been archived. It is permanently highlighted when the archiving of the
clip is completed.
Depending on the mode selected with the D key (CLIP/CAM), the >ARCHIVE
flag is assigned only to the camera angles of the clip loaded on the
controlled channels (CAM mode), or to all camera angles of the clip (CLIP
mode).
9.2.11.4 A
UX
C
LIP
This function allows assigning a clip as auxiliary audio clip to the current
playlist. Press CLEAR + Aux Clip (CLEAR + SHIFT + B) to remove the
current auxiliary clip. Refer to the Chapter 11 ‘Playlist Management’, on
page 86 for more details.
1 The EVS Xfile is a 2U device with 2 removable hard drives, that can be connected to the XNet SDTI network. Clips
can be archived to/restored from the removable medias.