ZyXEL Communications 70 Series - Manual (Page 89)

ZyWALL 5/35/70 Series User’s Guide
89 Chapter 3 Wizard Setup
3.2.2 Internet Access Wizard: Second Screen
Click Next to go to the screen where you can register your ZyWALL and activate the free
content filtering, anti-spam, anti-virus and IDP trial applications. Otherwise, click Skip to
display the congratulations screen and click Close to complete the Internet access setup.
Note: Make sure you have installed the ZyWALL Turbo Card before you activate the
IDP and anti-virus subscription services.
Turn the ZyWALL off before you install or remove the ZyWALL Turbo Card.
Figure 18 Internet Access Wizard: Second Screen
Connection ID/
Name
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
WAN IP Address
Assignment
IP Address
Assignment
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
My WAN IP
Address
Enter your WAN IP address in this field.
First DNS Server
Second DNS
Server
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Apply Click Apply to save your changes and go to the next screen.
Table 13 ISP Parameters : PPTP Encapsulation
LABEL DESCRIPTION