beautypg.com

ZyXEL Communications 70 Series User Manual

Page 76

background image

ZyWALL 5/35/70 Series User’s Guide

Chapter 2 Introducing the Web Configurator

76

WAN

General

This screen allows you to configure load balancing, route priority

and traffic redirect properties.

Route

(ZyWALL 5

only)

This screen allows you to configure route priority.

WAN (ZyWALL

5 only)

Use this screen to configure the WAN port for internet access.

WAN1

(ZyWALL 35

and ZyWALL

70)

Use this screen to configure the WAN1 port for Internet access.

WAN2

(ZyWALL 35

and ZyWALL

70)

Use this screen to configure the WAN2 port for Internet access.

Traffic Redirect Use this screen to configure your traffic redirect properties and

parameters.

Dial Backup

Use this screen to configure the backup WAN dial-up connection.

DMZ

DMZ

Use this screen to configure your DMZ connection.

Static DHCP

Use this screen to assign fixed IP addresses on the DMZ.

IP Alias

Use this screen to partition your DMZ interface into subnets.

Port Roles

Use this screen to change the DMZ/WLAN port roles on the

ZyWALL 70 or the LAN/DMZ/WLAN port roles on the ZyWALL 5 or

ZyWALL 35.

WLAN

WLAN

Use this screen to configure your WLAN connection.

Static DHCP

Use this screen to assign fixed IP addresses on the WLAN.

IP Alias

Use this screen to partition your WLAN interface into subnets.

Port Roles

Use this screen to change the DMZ/WLAN port roles on the

ZyWALL 70 or the LAN/DMZ/WLAN port roles on the ZyWALL 5 or

ZyWALL 35.

WIRELESS

CARD

Wireless Card

Use this screen to configure the wireless LAN settings and WLAN

authentication/security settings.

MAC Filter

Use this screen to change MAC filter settings on the ZyWALL

SECURITY

FIREWALL

Default Rule

Use this screen to activate/deactivate the firewall and the direction

of network traffic to which to apply the rule

Rule Summary This screen shows a summary of the firewall rules, and allows you

to edit/add a firewall rule.

Anti-Probing

Use this screen to change your anti-probing settings.

Threshold

Use this screen to configure the threshold for DoS attacks.

Table 6 Screens Summary (continued)

LINK

TAB

FUNCTION

This manual is related to the following products: