ZyXEL Communications 70 Series - Manual (Page 436)

ZyWALL 5/35/70 Series User’s Guide
Chapter 27 Remote Management 436
27.4 HTTPS Example
If you haven’t changed the default HTTPS port on the ZyWALL, then in your browser enter
“https://ZyWALL IP Address/” as the web site address where “ZyWALL IP Address” is the IP
address or domain name of the ZyWALL you wish to access.
27.4.1 Internet Explorer Warning Messages
When you attempt to access the ZyWALL HTTPS server, a Windows dialog box pops up
asking if you trust the server certificate. Click View Certificate if you want to verify that the
certificate is from the ZyWALL.
You see the following Security Alert screen in Internet Explorer. Select Yes to proceed to the
web configurator login screen; if you select No, then web configurator access is blocked.
Figure 208 Security Alert Dialog Box (Internet Explorer)
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 153 WWW (continued)
LABEL DESCRIPTION