ZyXEL Communications 70 Series - Manual (Page 115)

ZyWALL 5/35/70 Series User’s Guide
115 Chapter 5 LAN Screens
5.6 LAN Static DHCP
This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALL’s static DHCP settings, click NETWORK, LAN and then the
Static DHCP tab. The screen appears as shown.
Figure 36 LAN Static DHCP
The following table describes the labels in this screen.
Table 23 LAN Static DHCP
LABEL DESCRIPTION
# This is the index number of the Static IP table entry (row).
MAC Address Type the MAC address of a computer on your LAN.