ZyXEL Communications 70 Series - Manual (Page 486)

ZyWALL 5/35/70 Series User’s Guide
Chapter 31 Maintenance 486
Figure 246 Password Setup
The following table describes the labels in this screen.
31.4 Time and Date
The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyWALL.
To change your ZyWALL’s time and date, click MAINTENANCE, then the Time and Date
tab. The screen appears as shown. Use this screen to configure the ZyWALL’s time based on
your local time zone.
Table 173 Password Setup
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Retype to Confirm Type the new password again for confirmation.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.