ZyXEL Communications 70 Series - Manual (Page 78)

ZyWALL 5/35/70 Series User’s Guide
Chapter 2 Introducing the Web Configurator 78
NAT NAT Overview Use this screen to enable NAT.
Address
Mapping
Use this screen to configure network address translation mapping
rules.
Port
Forwarding
Use this screen to configure servers behind the ZyWALL.
Port Triggering Use this screen to change your ZyWALL’s port triggering settings.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.
POLICY ROUTE Policy Rout
Summary
Use this screen to view a summary list of all the policies and
configure policies for use in IP policy routing.
BW MGMT Summary Use this screen to enable bandwidth management on an interface.
Class Setup Use this screen to set up the bandwidth classes.
Monitor Use this screen to view the ZyWALL’s bandwidth usage and
allotments.
DNS System Use this screen to configure the address and name server records.
Cache Use this screen to configure the DNS resolution cache.
DHCP Use this screen to configure LAN/DMZ/WLAN DNS information.
DDNS Use this screen to set up dynamic DNS.
REMOTE MGMT WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTPS or HTTP to manage
the ZyWALL.
SSH Use this screen to configure through which interface(s) and from
which IP address(es) users can use Secure Shell to manage the
ZyWALL.
TELNET Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
ZyWALL.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyWALL.
SNMP Use this screen to configure your ZyWALL’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyWALL.
CNM Use this screen to configure and allow your ZyWALL to be
managed by the Vantage CNM server.
UPnP UPnP Use this screen to enable UPnP on the ZyWALL.
Ports Use this screen to view the NAT port mapping rules that UPnP
creates on the ZyWALL.
ALG ALG Use this screen to allow certain applications to pass through the
ZyWALL.
LOGS View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your ZyWALL’s log settings.
Reports Use this screen to have the ZyWALL record and display the
network usage reports.
Table 6 Screens Summary (continued)
LINK TAB FUNCTION