ZyXEL Communications 70 Series - Manual (Page 532)

ZyWALL 5/35/70 Series User’s Guide
Chapter 36 Internet Access 532
C
H A P T E R
36
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
36.1 Introduction to Internet Access Setup
Use information from your ISP along with the instructions in this chapter to set up your
ZyWALL to access the Internet. There are three different menu 4 screens depending on
whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to
determine what encapsulation type you should use.
Note: This menu configures WAN 1 on a ZyWALL with multiple WAN ports. Configure
the WAN 2 port in Menu 11.2 - Remote Node Profile or in the WAN WAN 2
screen via the web configurator.
36.2 Ethernet Encapsulation
If you choose Ethernet in menu 4 you will see the next menu.
Figure 286 Menu 4: Internet Access Setup (Ethernet)
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: