ZyXEL Communications 70 Series - Manual (Page 775)

ZyWALL 5/35/70 Series User’s Guide
775 Appendix S Log Descriptions
Configuration Change: PC =
0x%x, Task ID = 0x%x The router is saving configuration changes.
Successful SSH login Someone has logged on to the router’s SSH server.
SSH login failed Someone has failed to log on to the router’s SSH server.
Successful HTTPS login Someone has logged on to the router's web configurator
interface using HTTPS protocol.
HTTPS login failed Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.
DNS server %s was not
responding to last 32
consecutive queries… The specified DNS server did not respond to the last 32
consecutive queries.
DDNS update IP:%s (host %d)
successfully The device updated the IP address of the specified DDNS
host name.
SMTP successfully The device sent an e-mail.
myZyXEL.com registration
successful Registration of the device with myZyXEL.com was successful.
Trial service registration
successful Registration for a trial service was successful.
Service upgrade successful Registration for a service upgrade was successful.
Service refresh successful. The device successfully refreshed service information from
myZyXEL.com.
Content Filter trial service
activation successfully The content filtering trial service was successfully activated for
this device.
Anti-Spam trial service
activation successfully The anti-spam trial service was successfully activated for this
device.
IDP/Anti-Virus trial service
activation successfully The IDP and anti-virus trial service was successfully activated
for this device.
%s The myZyXEL.com service registration failed due to the error
listed. If you are unable to register for services at
myZYXEL.com, the error message displayed in this log may
be useful when contacting customer support.
Table 276 System Error Logs
LOG MESSAGE DESCRIPTION
%s exceeds the max.
number of session per
host! This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
setNetBIOSFilter: calloc
error The router failed to allocate memory for the NetBIOS filter settings.
readNetBIOSFilter: calloc
error The router failed to allocate memory for the NetBIOS filter settings.
Table 275 System Maintenance Logs (continued)
LOG MESSAGE DESCRIPTION