ZyXEL Communications 70 Series - Manual (Page 399)

ZyWALL 5/35/70 Series User’s Guide
399 Chapter 24 Policy Route
Figure 192 Edit IP Policy Route
The following table describes the labels in this screen.
Table 135 Edit IP Policy Route
LABEL DESCRIPTION
Criteria
Active Select the check box to activate the policy.
Rule Index This is the index number of the policy route.
IP Protocol Select Predefined and then the IP protocol from ALL(0), ICMP(1), IGMP(2),
TCP(6), UDP(17), GRE(47), ESP(50) or AH(51).
Otherwise, select Custom and enter a number from 0 to 255.
Type of Service Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max
Thruput, Max Reliable or Mix Cost.
Precedence Precedence value of the incoming packet. Select a value from 0 to 7 or Any.