ZyXEL Communications 70 Series - Manual (Page 250)

ZyWALL 5/35/70 Series User’s Guide
Chapter 13 Configuring IDP 250
Figure 115 IDP: Signatures
The following table describes the labels in this screen.
Table 80 IDP Signatures: Group View
LABEL DESCRIPTION
Signature Groups
Attack Type Select the type of signatures you want to view from the list box. See Section 13.3.1 on
page 246 for information on types of signatures.
Switch to
query view
Click this hyperlink to go to a screen where you can search for signatures based on
criteria other than attack type.
Name The (read-only) signature name identifies a specific signature targeted at a specific
intrusion. Click the hyperlink for more detailed information on the intrusion.
ID Each intrusion has a unique identification number. This number may be searched at
myZyXEL.com for more detailed information.
Severity This field displays the level of threat that the intrusion may pose. See Table 78 on page
248 for more information on intrusion severity.
Platform This field displays the computer or network device operating system that the intrusion
targets or is vulnerable to the intrusion. These icons represent a Windows operating
system, a UNIX-based operating system and a network device respectively.
Active Select the check box in the heading row to automatically select all check boxes and
enable all signatures.
Clear it to clear all entries and disable all signatures on the current page. For example,
you could clear all check boxes for signatures that targets operating systems not in
your network. This would speed up the IDP signature checking process.
Alternatively, you may select or clear individual entries. The check box becomes gray
when you select the check box.
If you edited any of the check boxes in this column on the current page, use the check
box in the heading row to switch between the settings (last partial edited, all selected
and all cleared).