ZyXEL Communications 70 Series - Manual (Page 193)

ZyWALL 5/35/70 Series User’s Guide
193 Chapter 9 Wireless LAN
Figure 81 Wireless Card: Static WEP
The following table describes the wireless LAN security labels in this screen.
9.16.2 WPA-PSK
Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select
WPA-PSK from the Security list.
Table 55 Wireless Card: Static WEP
LABEL DESCRIPTION
Security Select Static WEP from the drop-down list.
WEP
Encryption
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters
(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the same
on the access points as they are on the wireless stations.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.