Smt menu 1 - general setup, 1 introduction to general setup, 2 configuring general setup – ZyXEL Communications 70 Series User Manual
Page 508: Chapter 33 smt menu 1 - general setup, Figure 268 menu 1: general setup (router mode), Table 184 menu 1: general setup (router mode)
ZyWALL 5/35/70 Series User’s Guide
Chapter 33 SMT Menu 1 - General Setup
508
C
H A P T E R
33
SMT Menu 1 - General Setup
Menu 1 - General Setup contains administrative and system-related information.
33.1 Introduction to General Setup
Menu 1 - General Setup contains administrative and system-related information.
33.2 Configuring General Setup
1 Enter 1 in the main menu to open Menu 1 - General Setup.
2 The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.
Figure 268 Menu 1: General Setup (Router Mode)
The following table describes the fields in this menu.
Menu 1 - General Setup
System Name=
Domain Name=
Device Mode= Router Mode
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel:
Table 184 Menu 1: General Setup (Router Mode)
FIELD
DESCRIPTION
System Name
Choose a descriptive name for identification purposes. It is recommended you enter
your computer’s “Computer name” in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.
Domain Name
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP. You can go to menu 24.8 and type "sys
domain name" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain
name. If you want to clear this field just press [SPACE BAR] and then [ENTER].
Device Mode
Press [SPACE BAR] and then [ENTER] to select Router Mode.