ZyXEL Communications 70 Series - Manual (Page 196)

ZyWALL 5/35/70 Series User’s Guide
Chapter 9 Wireless LAN 196
9.16.4 IEEE 802.1x + Dynamic WEP
Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select
802.1x + Dynamic WEP from the Security list.
Figure 84 Wireless Card: 802.1x + Dynamic WEP
The following wireless LAN security fields become available when you select 802.1x +
Dynamic WEP in the Security drop down list-box.
Table 58 Wireless Card: 802.1x + Dynamic WEP
LABEL DESCRIPTION
Security Select 802.1x + Dynamic WEP from the drop-down list.
ReAuthentication
Timer (Seconds)
Specify how often wireless stations have to resend user names and passwords in
order to stay connected. Enter a time interval between 10 and 65535 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the user name and
password again before access to the wired network is allowed.
Authentication
Databases
Click RADIUS to go to the RADIUS screen where you can configure the ZyWALL to
check an external RADIUS server.
Dynamic WEP
Key Exchange
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.