Remote management, 1 remote management overview, 1 remote management limitations – ZyXEL Communications 70 Series User Manual
Page 432: Chapter 27 remote management
ZyWALL 5/35/70 Series User’s Guide
Chapter 27 Remote Management
432
C
H A P T E R
27
Remote Management
This chapter provides information on the Remote Management screens.
27.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See
for details on configuring firewall rules.
You may manage your ZyWALL from a remote location via:
Note: When you choose DMZ only, WAN only, WLAN only or ALL (LAN & WAN&
DMZ& WLAN), you still need to configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyWALL
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
3 Telnet
4 HTTPS and HTTP
27.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
• Internet (WAN only)
• ALL (LAN&WAN&DMZ&WLAN)
• LAN only,
• DMZ only,
• WLAN only,
• Neither (Disable).