Yamaha AW2400 - Manual (Page 98)

AW2400 Owner’s Manual
Level Meter Types
98
Meters
10
G PEAK HOLD button
This button switches the level meter peak hold function
on/off. When this button is on, an indicator will show the
signal peaks.
■ METER screen Master page ([F3] key)
Displays the output and fader levels for BUS1 L/R, BUS2
L/R, AUX bus 1–4, effect bus 1–4, and the stereo bus.
The following items are displayed:
1 BUS1 L/R, BUS2 L/R output levels
B
AUX bus 1–4 output levels
C Effect bus 1–4 output levels
D Stereo bus output level
The level meters display the output levels for the corre-
sponding channels, while the numbers below the level
meters show the fader levels in dB.
E PRE EQ button
Pre-EQ levels (levels prior to the EQ stage) are displayed
when this button is on.
F PRE FADER button
Pre-fader levels (levels prior to the faders) are displayed
when this button is on.
G POST FADER button
Post-fader levels (levels after the faders) are displayed
when this button is on.
H PEAK HOLD button
This button switches the level meter peak hold function
on/off.
■ METER screen Output page ([F4] key)
Displays the output and fader levels for a digital I/O card
installed in the card slot, the [OMNI OUT] 1–4 outputs,
and the [DIGITAL STEREO OUT] outputs.
The following items are displayed:
1 Output levels for the card installed in the
slot
B [OMNI OUT] 1–4 output levels
C [DIGITAL STEREO OUT] output levels
The level meters display the output levels for the corre-
sponding channels, while the numbers below the level
meters show the fader levels in dB.
D PEAK HOLD button
This button switches the level meter peak hold function
on/off.
• The Input/RTN page and Track page PRE EQ/PRE FADER/POST
FADER button settings are linked, while the Master page settings
are independent.
• The PEAK HOLD button setting affects all METER pages.
• Pressing the [F1] key while holding the Display section [SHIFT]
key has the same effect as the PEAK HOLD button.
HINT
D
E F G H
A B C
• These PRE EQ/PRE FADER/POST FADER settings are indepen-
dent from those on other pages.
• The PEAK HOLD button setting affects all METER pages.
• Pressing the [F1] key while holding the Display section [SHIFT]
key has the same effect as the PEAK HOLD button.
HINT
B C D
A
• The PEAK HOLD button setting affects all METER pages.
• Pressing the [F1] key while holding the Display section [SHIFT]
key has the same effect as the PEAK HOLD button.
HINT