Yamaha AW2400 - Manual (Page 156)

AW2400 Owner’s Manual
EQ/Dynamics Processor Library Operation
P
an, EQ, and Dynamics Processing
156
16
F Buttons
These buttons execute the RENAME, RECALL,
STORE, and CLEAR functions. For details on their
operation refer to the following explanations.
Here’s how you can change the names of the settings in
the libraries.
1
Access the page containing the library to
be edited.
For details on accessing the various library pages refer
to “Accessing the EQ/Dynamics Library screens” on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library setting to be edited.
The setting highlighted by a dotted frame is currently
selected for editing.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
4
Enter a name for the selected library set-
ting, move the cursor to the OK button, and
press the [ENTER] key (refer to page 32 for
details on name entry).
This confirms and enters the new name.
The procedure for recalling stored library settings is as
follows.
1
Access the page containing the library set-
tings to be recalled.
For details on accessing the various library pages refer
to “Accessing the EQ/Dynamics Library screens” on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library setting to be recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
The following illustration is an example of when the
RECALL button is pressed in the PAN/EQ screen EQ
Lib. page.
4
To actually recall the selected setting move
the cursor to the OK button and press the
[ENTER] key.
Changing EQ/Dynamics Library
Names
• The names of read-only library settings (those marked with an
icon) cannot be changed.
NOTE
• The [INC]/[DEC] keys can also be used to select library set-
tings.
HINT
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the RENAME button.
HINT
Recalling EQ/Dynamics Library
settings
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
HINT
• The recall confirmation popup window can be disabled if
desired. Refer to “AW2400 Preferences” on page 211 for
details.
HINT