Yamaha AW2400 - Manual (Page 226)

AW2400 Owner’s Manual
Wordclock and Cascade Settings
226
Digital Input/Output & Optional Card Settings
23
When the AW2400 is set to use it’s own internal clock as
the wordclock source it is possible to adjust the sampling
frequency over a small range to adjust the pitch and tempo
of song playback (Vari-pitch). This function can be useful
to match the playback pitch of an AW2400 song to an
acoustic instrument, or to adjust the length of a song.
1
Call the DIO screen Setting page by either
pressing the Work Navigate section [DIO]
key as many times as necessary, or by
pressing the [F1] key after pressing the
[DIO] key.
2
Move the cursor to the WORDCLOCK
SOURCE field INT button and press the
[ENTER] key.
This selects the AW2400 internal clock as the word-
clock source.
3
Move the cursor to the VARI field.
Vari-pitch settings are made via the VARI field.
1 FIX button
When this button is turned on the sampling frequency
is fixed at the sampling frequency shown to the right of
the button (default).
B VARI button
The Vari-pitch function is active when this button is
turned on.
C VARI knob
Adjusts the sampling frequency of the current song in
a range of -5.97 to +6.00%.
4
Move the cursor to the VARI button and
press the [ENTER] key.
This activates the Vari-pitch function.
5
Move the cursor to the VARI knob and use
the [DATA/JOG] dial or [INC]/[DEC] keys to
set the sampling frequency as required.
6
To disable the Vari-pitch function move the
cursor to the FIX button and press the
[ENTER] key.
The Vari-pitch function will be turned off and the sam-
pling frequency will be fixed at the value shown to the
right of the FIX button.
Digital audio signals received at the AW2400 [DIGITAL
STEREO IN] connector can be mixed directly into the
AW2400’s stereo bus (cascade connection). The output
from a digital mixer could be cascade-connected in this
way to allow the mixer’s inputs to be mixed to stereo
along with the AW2400’s own inputs.
● AW2400 Cascade Connection
1
Connect the digital output from the device
to be cascade connected to the AW2400
[DIGITAL STEREO IN] connector.
2
Call the DIO screen Setting page by either
pressing the Work Navigate section [DIO]
key as many times as necessary, or by
pressing the [F1] key after pressing the
[DIO] key.
3
Move the cursor to the D.ST IN button in the
WORDCLOCK SOURCE field and press the
[ENTER] key.
This selects the signal received at the [DIGITAL STE-
REO IN] connector as the wordclock source.
Fine Adjustment Of Overall Song
Pitch (Vari-pitch)
B
C
A
• When the Vari-pitch function is enabled and sampling fre-
quency is adjusted, any external devices slaved to the
AW2400 wordclock signal will be affected. Some slave
devices may not be able to synchronize properly to the
AW2400 wordclock signal when it is adjusted using the Vari-
pitch function.
NOTE
Cascade-connecting External
Devices
Input channels
Track channels
Effect return channels
Stereo bus
Stereo track
[STEREO OUT] jack, etc.
Digital audio
output
[DIGITAL STEREO IN]
connector
AW2400
(Wordclock slave)
Stereo output channel
External device
(Wordclock master)