Yamaha AW2400 - Manual (Page 228)

AW2400 Owner’s Manual 228
Digital Input/Output & Optional Card Settings
23
• CATEGORY
Indicates the status of “Category Code Bit” included in
the IEC958 Part 2 (S/PDIF-Consumer) format. This
parameter can display the following values:
• COPY
Indicates the status of copy protection information
included in the IEC958 Part2 (S/PDIF-Consumer) for-
mat signals.
B [DIGITAL STEREO IN] connector status
Indicates the status of the digital audio signal received at
the [DIGITAL STEREO IN] connector.
C SLOT
When an I/O card is installed in the rear-panel slot a
graphic symbol that indicates the type of card appears
here. “NO CARD” will appear when no card is installed.
D Digital I/O card status
Displays the status of the digital audio signal received via
a digital I/O card.
Settings for plug-in DSP cards installed in the rear-panel slot are made via the DIO screen Plug-
in page.
To call this page press the Work Navigate section [DIO]
key as many times as necessary, or press the [F3] key after
pressing the [DIO] key. The content of the display will depend on the plug-in card
installed. Refer to the plug-in card owner’s manual for
details.
As of July 2005 the available plug-in card is:
• Waves .................. Y96K
Check the following Yamaha website for the latest infor-
mation on plug-in cards.
http://www.yamahaproaudio.com/
Parameter values Description
General Temporarily used.
Laser Optical Laser optical device
D/D Conv
Digital - Digital converter and signal pro-
cessing device
Magnetic
Magnetic tape device and magnetic disk
device
D.Broadcast Digital broadcast reception
Instrument
Musical instrument, microphone, and
sources that generate string signals
AD Conv
A/D converter
(without copyright information)
AD Conv with (c)
A/D converter
(with copyright information)
Solid Memory Solid memory device
Experiment Experimental device
Unknown Unknown device
• “AES/EBU” appears in the Category row when you are moni-
toring IEC958 Part 3 (AES/EBU-Professional) format signals
(that do not include Category Code Bit).
NOTE
Parameter values Description
OK Copy allowed
Prohibit Copy prohibited
• The status of digital signals received via a digital I/O card is dis-
played in odd/even channel pairs.
HINT
Plug-in Card Settings
Check the Status Of the Digital Input Signal • Plug-in Card Settings