Channel operation, P. 105), Chapter 12 – Yamaha AW2400 User Manual
Page 105: Input channels 1–16, Track channels 1–24, Effect return channels 1–4
105
AW2400 Owner’s Manual
Channel Oper
ation
12
Chapter 12
Channel Operation
This chapter describes procedures for displaying and operating the parame-
ters for individual channels as well as for saving and recalling data library
settings for individual settings.
If you access the CH VIEW screen View page, you can not only see the signal flow for the
selected channel, but also adjust the mix parameters within the displayed signal path.
To call this page press the Selected Channel section
[VIEW] key as many times as necessary, or press the [F1]
key after pressing the [VIEW] key.
Immediately after pressing the [VIEW] key the signal
flow of the currently selected channel will appear on the
display. You can select any other channel to be displayed
by using the Layer section keys to select a mixing layer,
and the [INPUT SEL], [SEL], and [STEREO SEL] keys to
select individual channels.
The items included in the individual channel displays are
as follows.
Displaying the mix parameters for individual channels
■ Input channels 1–16
C
A
L
K
J
D
F
G
E
H I
B
■ Track channels 1–24
C
A
L
K
D
F
G
H I
E
B
■ Effect return channels 1–4
C
A
L
K
D
F
H I