Saving the current song – Yamaha AW2400 User Manual
Page 57
57
AW2400 Owner’s Manual
Tr
ac
k recording
6
6
If you want to redo the recording, press the
[UNDO/REDO] key.
The [UNDO/REDO] key will go out, and you will
return to the state prior to recording. Repeat steps 2–5.
7
If you are satisfied with the recorded con-
tent, save the song. (For details on saving,
refer to “Saving the current song”.)
Please be aware that the recorded content will be lost
if you turn off the AW2400 power before saving the
song.
8
When you finish recording, press the Quick
Navigate Section [RECORD] key once
again, move the cursor to the SAFE button,
and press the [ENTER] key.
When the confirmation popup window appears so
move the cursor to the OK button and press the
[ENTER] key. The input-to-track assignments will be
cancelled. The REC [
●] key will be disabled to pre-
vent accidental recording.
This section explains how to save the current song to the hard disk. If you accidentally turn off
the AW2400 power without saving the song, all recordings or operations that you performed
since last saving the song will be lost. You should make a habit of saving the song at appropriate
breaks in your work.
1
Call the SONG screen Song List page by
either pressing the Work Navigate section
[SONG] key as many times as necessary, or
by pressing the [F1] key after pressing the
[SONG] key.
2
Move the cursor to the SAVE button and
press the [ENTER] key.
A popup window will ask you to confirm that you
want to save the current song.
3
To save the song, move the cursor to the
YES button and press the [ENTER] key.
If you move the cursor to the NO button (instead of the
YES button) and press the [ENTER] key, the Save
operation will be cancelled.
Saving the current song
SAVE button
• The song save operation always saves the current song,
regardless of the song that is selected in the list.
• You cannot save a song that is protected. If, for example, you
have edited the mixer settings and need to save the song, you
must disable the protect setting and then save the song. (For
details on song protection, refer to page 172)
NOTE
• A number of other operations are available in the SONG
screen List page. Refer to “Managing Your Songs” on
page 167 for details.
• In the following situations a popup window will ask whether
you want to save the current song: when you load an existing
song from the hard disk, when you create a new song, or
when you shut-down the AW2400.
• We recommend that you frequently save the song you are
working on or enable the Auto Save function (
safeguard against accidents such as the AW2400’s power
cable being accidentally disconnected.
HINT