Yamaha AW2400 - Manual (Page 87)

87
AW2400 Owner’s Manual
Tr
anspor
t/Locate Oper
ation
9
Chapter 9
Transport/Locate Operation
This chapter covers transport key operation, use of the locate/marker functions, and a range of
other playback features.
The functions of the Transport section keys change according to the current state of the recorder
(playback, stopped, etc.), as listed in the chart below.
The REC [ ●] key has no effect if no tracks are set to the record standby mode.
The AW2400 allows you to move directly to any location in a song by numerically specifying the
desired locate point.
1
With the recorder stopped, press the
Locate/Number section [NUM.LOCK] key so
that its indicator lights.
A popup window will appear into which you can enter
the destination locate point.
2
Enter the locate point in measures/beats.
You can use either of the following two methods to
enter the locate point.
● Use the [DATA/JOG] dial or [INC]/[DEC]
keys
Move the cursor to the measure or beat field, and use
the [DATA/JOG] dial or [INC]/[DEC] keys to set as
required.
Key
Recorder Status
Playing Stopped Rewinding Fast Forwarding Recording
PLAY[ ] key — Play Play Play
Stop record and play
(Punch Out)
STOP[ ■] key Stop — Stop Stop Stop
REW[ ] key Rewind Rewind
Rewind speed
(8x ↔ 16x)
Rewind —
FF[ ] key Fast forward Fast forward Fast forward
Fast forward speed
(8x ↔ 16x)
—
RTZ[ ] key Return to zero and play Return to zero and stop
Return to zero and play
or stop (depending on
Play/Stop status prior to
rewind) Return to zero and play
or stop (depending on
Play/Stop status prior to
fast forward)
—
REC[ ●] key
Press simultaneously
with PLAY [
] key to
begin recording (Punch
In)
Press simultaneously
with PLAY [
] key to
begin recording
— — —
The Transport Section Keys
Move To a Specified Location