Yamaha AW2400 - Manual (Page 116)

AW2400 Owner’s Manual
Recalling Effect Library settings
Eff
ects
116
14
The first step in using an effect is to recall a preset from the effect library that uses the required
effect.
1
Press the Selected Channel section
[EFFECT] key so that its indicator lights.
The EFFECT screen will appear.
2
Press Selected Channel knob 1–4, corre-
sponding to the effect processor to which
you want to load the effect.
While the EFFECT screen is showing Selected Chan-
nel knobs correspond to effect processors 1–4. So, for
example, the EFFECT1 screen will be selected if you
press Selected Channel knob 1.
3
Press the Display section [F4] key to call
the FX Lib. Page.
You can select the effect library preset to be loaded
into the effect processor selected in step 2 via this
page.
4
Move the cursor to the List, and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the library setting to be recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
5
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
6
To actually recall the selected setting move
the cursor to the OK button and press the
[ENTER] key.
The library setting will be recalled.
Recalling Effect Library settings
• The effect type for a recalled effect library preset cannot be changed. For this reason even
when you want to program an effect from scratch it is necessary to begin by recalling an
effect library preset that includes the effect type you want to use.
HINT
• If the AUTO DISPLAY function is set to OFF ( → p. 211), the
EFFECT screen will not appear automatically when step 1,
above, is performed. In this case press one of the Selected
Channel knobs (1–4) will cause the corresponding EFFECT
screen to appear.
HINT
List RECALL button
• Library numbers 1–43 contain pre-programmed read-only
effect presets.
• Refer to “Effect Library Operations” on page 122 for details on
the effect library RENAME, STORE, and CLEAR functions.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
HINT