Renaming a scene, Recalling scene data – Yamaha AW2400 User Manual
Page 160
AW2400 Owner’s Manual
Scene Memory Operation
Scene Memor
y
160
17
Entering a new name for a scene.
1
Call the SCENE screen Library page by
either pressing the [SCENE] key as many
times as necessary, or by pressing the [F1]
key after pressing the [SCENE] key.
2
Rotate the [DATA/JOG] dial to select the
scene to be renamed.
The dotted frame indicates the currently selected
scene. You can use the [DATA/JOG] dial to scroll
through the list regardless of the position of the cursor.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
4
Enter the new name. Then move the cursor
to the OK button and press the [ENTER]
key. (For details on entering a name
→ p. 32)
The new name will be applied.
Here’s how to recall (load) settings from a scene.
1
Call the SCENE screen Library page by
either pressing the [SCENE] key as many
times as necessary, or by pressing the [F1]
key after pressing the [SCENE] key.
2
Turn the [DATA/JOG] dial to scroll the list so
that the scene you want to recall is
enclosed in the dotted frame.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window will ask you to confirm the Recall
operation.
4
To execute the recall operation, move the
cursor to the OK button and press the
[ENTER] key.
The scene will be recalled.
Renaming a scene
• In addition to the [DATA/JOG] dial, the [INC]/[DEC] keys can
be used to make selections.
HINT
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the RENAME button.
HINT
Recalling scene data
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
HINT
• The confirmation popup window can be disabled so that it
does not appear when you perform a Recall operation. For
details, refer to “AW2400 Preferences” (
HINT