Yamaha AW2400 - Manual (Page 130)

AW2400 Owner’s Manual 130
Tr
ac
k oper
ations and editing
15
Here’s how to assign a name to the virtual track that is cur-
rently selected for an audio track.
1
Call the TRACK screen View page by either
pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F1] key after pressing
the [TRACK] key.
2
Move the cursor to the TRACK field, and
use the [DATA/JOG] dial or the [INC]/[DEC]
keys to select the number of the track
whose name you want to edit.
You can edit the name of the currently-enabled virtual
track for the track you selected in the TRACK field.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear, allow-
ing you to assign a name to the virtual track.
4
Edit the name of the virtual track, move the
cursor to the OK button and press the
[ENTER] key. (For details on editing a name
→ p. 32)
The edited name will be applied.
Independently from audio tracks 1–24, the AW2400 has a
“stereo track” that records and plays a stereo audio signal.
The stereo track is used mainly as a dedicated mixdown
track for recording the final mix.
The signal of the stereo output channel is always con-
nected to the stereo track; you will always be able to
record the signal of the stereo bus simply by putting the
stereo track in record-ready mode.
You cannot record audio tracks while recording the stereo
track. While the stereo track is playing, audio tracks 1–24
will be forcibly muted.
In the TRACK screen Stereo TR page you can check
whether the stereo track contains data, and switch the vir-
tual track for the stereo track. To call this page press the
Work Navigate section [TRACK] key as many times as
necessary, or press the [F3] key after pressing the
[TRACK] key.
This page contains the following items.
Editing virtual track names for
an audio track
RENAME button
TRACK field
Stereo track operations
About the stereo track
C D
F G H I E
A B
Audio track operations • Stereo track operations