Yamaha AW2400 - Manual (Page 180)

AW2400 Owner’s Manual
Exchanging Song Data With Other AW-series Audio Workstations
Song management
180
18
You can back up an AW2400 song in a format that is compatible with the other AW-series
(AW4416/AW2816/AW1600/AW16G). Conversely, a song that was backed up by the other AW-
series can be restored into the AW2400.
If you turn on the AW2816 button in the Backup page of
the SONG screen, the data will be saved in the AW2816
backup file format.
An AW2816 backup file can be restored into the other
AW-series (version 2.0 or later for AW4416). For the pro-
cedure, refer to “Backing up songs,” earlier in this manual. 1
Insert the CD-R/RW media containing
songs from other AW-series workstations
to be restored into the AW2400.
2
Call the SONG screen Restore page by
either pressing the Work Navigate section
[SONG] key as many times as necessary, or
by pressing the [F4] key after pressing the
[SONG] key.
3
Make sure that the cursor is located at the
READ CD INFO button, and press the
[ENTER] key.
Information will be read from the inserted CD-R/RW
media.
4
Make sure the cursor is in the list area, use
the [DATA/JOG] dial to select the song you
want to restore, then press the [ENTER]
key.
A “
●” mark will appear for songs selected to be
restored.
5
Repeat step 4 to select all of the other AW-
series songs that you want to restore.
6
Move the cursor to the RESTORE button
and press the [ENTER] key.
A popup window will ask you to confirm the opera-
tion.
7
Move the cursor to the OK button if you
want to execute the restore operation, and
press the [ENTER] key.
The restore operation will begin. While the song data
is being loaded, a popup window will indicate the
progress.
Exchanging Song Data With Other AW-series Audio Workstations
• Only the audio data recorded in a song can be exchanged with the other AW-series workstations.
Mix parameters, libraries, and system data cannot be backed-up/restored in this way.
NOTE
■ Backing up an AW2400 song in a format
compatible with the other AW-series
• Backup in the AW2816 backup file format is limited to one song at
a time.
• When you perform a backup in the AW2816 backup file format,
data other than the audio tracks will not be backed up. All virtual
tracks for tracks 1–16 are backup up. Tracks 17–24 are not backed
up. Only the current track data for stereo track is backed up. Only
44.1kHz/16-bit songs are supported.
• Depending on the data size, some songs can’t be saved as
AW2816 backup files. If this problem occurs use the Optimize
function to reduce the data size.
NOTE
■ Restoring songs from other
AW-series workstations
• The list will show all the songs that were backed up to CD-R/
RW media, but you can execute the restore operation only for
44.1 kHz/16-bit songs.
NOTE