Importing copied wav files from the computer, Importing copied wav files, From the computer – Yamaha AW2400 User Manual
Page 234: Importing cop- ied wav files from the computer, P. 234)
AW2400 Owner’s Manual
WAV File Transfer (USB Storage Mode)
234
USB
24
6
When you have finished setting the param-
eters, move the cursor to the EXECUTE but-
ton and press the [ENTER] key.
If a source other than “ALL” is selected the NAME
EDIT popup window will appear, allowing you to
enter a file name.
If you select “ALL” as the source the NAME EDIT
popup window will appear, allowing you to enter a
folder name. The WAV files (“TRACK_01.WAV”–
“TRACK_24.WAV”) will be stored in the new folder,
which will be created inside the “Transport” folder.
7
Enter an appropriate file or folder name via
the NAME EDIT popup window, as required.
For details on how to enter a name, refer to page 32.
8
To execute the export operation, move the
cursor to the OK button and press the
[ENTER] key.
The export operation will begin. If you move the cur-
sor to the CANCEL button (instead of the OK button)
and press the [ENTER] key, the export operation will
be cancelled. (However, it is not possible to abort the
export process once it has been started.)
9
Switch to the USB Storage Mode (
and display the AW2400 internal hard disk
on the computer screen.
10
Open the “AW2400-2” drive to access the
“Transport” folder.
11
Copy the WAV files exported to the “Trans-
port” folder to the computer.
WAV files in the “Transport” folder can also be
directly accessed from computer applications.
12
When the files have been copied, discon-
nect the AW2400 from the computer and
exit the USB Storage Mode (
This procedure allows you to import WAV files transferred
from a computer to the “Transport” folder to be imported
into specified audio tracks.
1
Switch to the USB Storage Mode (
and display the AW2400 internal hard disk
on the computer screen.
2
Copy the WAV files from the computer to
the AW2400 “Transport” folder.
The “Transport” folder is located in the “AW2400-2”
drive.
3
When the files have been copied, discon-
nect the AW2400 from the computer and
exit the USB Storage Mode (
4
Call the EDIT screen Edit page by either
pressing the Work Navigate section [EDIT]
key as many times as necessary, or by
pressing the [F1] key after pressing the
[EDIT] key.
5
Move the cursor to the edit command field
and use the [DATA/JOG] dial or [INC]/[DEC]
keys to select IMPORT USB WAV.
6
Press the [ENTER] key to confirm the
selected edit command.
The display will appear as follows.
• Since the AW2400 does not keep track of the date and time,
dummy values will be written as the file creation date and time
of the WAV files.
• Tracks that do not contain data in the specified region will not
be exported.
NOTE
Importing Copied WAV Files
From the Computer
A
B
H
G
F
I
D
E
C