Yamaha AW2400 User Manual

Page 231

WAV File Transfer (USB Storage Mode)

231

AW2400 Owner’s Manual

USB

Turn on the AW2400.

No driver installation is necessary for WAV file trans-
fer. If it is the first time you have connected a USB
cable on a Windows machine, however, you may see a
message prompting you to install a USB MIDI driver.
Even if you will not send and receive MIDI messages
via the USB cable, install the USB MIDI driver as
described on page 266.

Call the USB screen USB page by pressing
the SCENE/AUTOMIX/USB section [USB]
key.

Move the cursor to the CONNECT button,
and press the [ENTER] key.

A popup window will ask you whether you want to
save the current song.

Move the cursor to YES (to save the current
song) or NO (if you don’t want to save the
current song) and press the [ENTER] key.

The AW2400 USB Storage Mode will be engaged, and
the button will change to “CANCEL”. Most of the
AW2400 functions are temporarily disabled while this
mode is engaged.

Display the AW2400 internal hard disk on
the computer screen.

● In the case of Windows XP:

The two windows will appear.

● In the case of Mac OS X:

The “AW2400-1” and “AW2400-2” drive icons will
appear on the desktop.

CONNECT button

• Before turning the USB Storage Mode on, make sure that no

MIDI data is being transferred via the USB connection with
your computer.

NOTE

• If the windows shown above do not appear, choose to display

the “AW2400-1” and “AW2400-2” drives from the Windows
Start

→ My Computer menu.

NOTE

• If the icons are not displayed properly, use the Disk Utility to

temporarily un-mount the appropriate volume, and then
mount it again.

NOTE