Yamaha AW2400 - Manual (Page 63)

Handy Recording Functions
63
AW2400 Owner’s Manual
Tr
ac
k recording
6
1 Tempo map events
These are the events recorded in the tempo map. When
you create a new song, a tempo map event of time sig-
nature = 4/4 and tempo = 120 will be created at the
beginning of the song (measure 1, beat 1).
5
Move the cursor to the TEMPO field of the
event, and use the [DATA/JOG] dial or [INC]/
[DEC] keys to set the tempo value.
The tempo can be set from 30 to 250 (BPM).
6
If necessary, move the cursor to the METER
field and use the [DATA/JOG] dial or [INC]/
[DEC] keys to change the time signature.
The time signature can be set from 1/4 to 8/4.
Each audio track contains eight virtual tracks. After over-
dubbing a solo part, you can switch the virtual track for
that track, and record a different take while preserving the
previously-recorded content.
1
Call the TRACK screen Virtual TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F2] key after pressing
the [TRACK] key.
1 Virtual tracks
Indicates the status of virtual tracks 1–8. The virtual
track that is currently selected for each track is indi-
cated by a “
●” symbol. Of the virtual tracks that are
currently not selected, those that have been recorded
are indicated by “
”, and those that have not yet been
recorded are indicated as “–”.
B Tracks
2
Use the cursor keys to select the virtual
track number that you want to assign to the
desired track.
3
Press the [ENTER] key.
The “
●” symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
now be used for recording/playback.
A
• It is also possible to change the tempo or time signature dur-
ing a song. For details, refer to “Creating a tempo map” ( →
p. 175).
HINT
Switching virtual tracks
B
A