Yamaha AW2400 - Manual (Page 23)

Parts of the AW2400 and what they do
23
AW2400 Owner’s Manual
Introducing the A
W2400
2
1 [SEL] keys 1–12
B
[STEREO SEL] key
Selects the channel to be operated. The [SEL] key of the
currently selected channel will light.
C [ON] keys 1 – 12
D [STEREO ON] key
Turns the corresponding channel ON or OFF. The [ON]
key will be lit when the corresponding channel is ON, and
out when the channel is OFF. The [ON] keys are also used
to specify solo channels when the solo function is on.
E Faders 1–12
The faders adjust recorder track playback levels, input
channel input levels, and effect return channel input levels
according to the mixing layer currently selected via the
LAYER section.
F [STEREO] fader
Adjusts the output level of the stereo bus.
G [SOLO] key
Turns the solo function ON or OFF.
■ Mixer section
E 6
1 C B D G
• When Trigger Track mode is engaged, the [ON] key can be used to
start/stop playback of the corresponding track.
HINT
• The [STEREO SEL] keys, [STEREO ON] keys, and [STEREO]
faders always operate stereo channels. These keys and faders are
not affected by the LAYER section settings.
NOTE