Yamaha AW2400 - Manual (Page 110)

AW2400 Owner’s Manual
Channel Library Operation
Channel Oper
ation
110
12
The procedure for recalling stored library settings is as
follows.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library setting to be
recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
4
To actually recall the selected setting move
the cursor to the OK button and press the
ENTER] key.
The procedure for erasing unwanted library settings is as
follows.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library setting to be
erased.
The setting highlighted by a dotted frame is currently
selected to be erased.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A popup window confirming the clear operation will
appear.
4
To actually erase the selected setting move
the cursor to the OK button and press the
[ENTER] key.
Recalling Channel Library settings
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
HINT
• Parameters that do not exist in the target channel will be
ignored.
• INSERT EFF settings as shown in the CH VIEW screen View
page are not included in the channel libraries and will not
change.
• When the target channel is a stereo channel or a channel
pair, all parameters except phase and pan will be set to the
same values (phase and pan will not change).
• When data cannot be recalled to the selected channel the
“Recall Channel Data Conflict!” error message will appear.
HINT
Erasing Channel Library settings
• Read-only library settings (those marked with an icon) cannot
be erased.
NOTE
• Pressing the [F3] key while holding the Display section
[SHIFT] key has the same effect as the CLEAR button.
HINT