Yamaha AW2400 - Manual (Page 235)

WAV File Transfer (USB Storage Mode)
235
AW2400 Owner’s Manual
USB
24
1 File list
This shows the WAV files and folders (directories) in
the “Transport” folder. Move the cursor to the list, and
use the [DATA/JOG] dial or the [INC]/[DEC] keys to
specify the WAV file that you want to import.
B FILE
This indicates the name of the WAV file or folder. The
icons shown here have the following meaning.
• .............Indicates a WAV file.
• .............Indicates a folder in the same level. You
can select this icon and press the
[ENTER] key to move down one level.
• ..............You can select this icon and press the
[ENTER] key to move up one level.
C TOTAL
Indicates the playback length (in units of hours/min-
utes/seconds/milliseconds) of the WAV file selected
for importing. This field is for display only, and cannot
be changed.
D TYPE
Indicates whether the WAV file selected for importing
is monaural (
) or stereo ( ). The numerical value
at the right indicates the bit depth of the WAV file.
This field is for display only, and cannot be changed.
E LISTEN/ENTER/UP button
This display will change according to the selected file
or folder in the file list.
• LISTEN ......If a WAV file is selected, you can move
the cursor to this button and press the
[ENTER] key to repeatedly hear the
currently selected WAV file.
• ENTER.......If a folder is selected, you can move the
cursor to this button and press the
[ENTER] key to move into that folder.
• UP ..............If the icon is selected, you can
move the cursor to this button and
press the [ENTER] key to move up one
folder.
F To TR
Selects the track number into which the WAV file will
be imported. If the import source is a stereo WAV file,
only tracks 1&2–23&24 can be selected.
G To V.TR
Selects the virtual track number (1–8) into which the
WAV file will be imported.
H To Start
Specifies the start location (in counter-display and
measure/beat format) to which the WAV file will be
imported.
I EXECUTE button
Executes the import operation.
7
Move the cursor to the file list and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the WAV file that you want to import.
When a is included in the field enclosed by the
dotted frame you can press the [ENTER] key to move
down one level. To move up one level display the
icon and press the [ENTER] key.
8
Use the To TR, To V.TR, and To Start fields to
specify the track number, virtual track num-
ber, and starting location into which the
WAV file will be imported.
9
When you have finished making the
required settings, move the cursor to the
EXECUTE button and press the [ENTER]
key.
A popup window will ask you to confirm the opera-
tion.
10
To execute the import operation, move the
cursor to the OK button and press the
[ENTER] key.
The import operation will begin. If you move the cur-
sor to the CANCEL button and press the [ENTER]
key, the import operation will be cancelled.
• Only 16-bit or 24-bit, 44.1 kHz or 48 kHz, mono or stereo
WAV files can be imported. Also, WAV files having a different
bit depth or sample rate from the song cannot be imported.
NOTE
• Any existing data at the import destination will be overwritten.
Be careful not to accidentally overwrite important data.
NOTE