Yamaha AW2400 - Manual (Page 132)

AW2400 Owner’s Manual
Stereo track operations
Tr
ac
k oper
ations and editing
132
15
3
Press the RTZ [ ] key to rewind the song,
and press the PLAY [ ] key.
The stereo track will play back. Use the [STEREO]
fader to adjust the monitor level.
To return to normal playback of the audio tracks,
switch the ST TR MODE ON/OFF button back OFF.
1
Call the TRACK screen Stereo TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F3] key after pressing
the [TRACK] key.
2
Use the CURSOR keys to select the virtual
track number that you want to assign.
The currently selected virtual track is indicated by a
“
●” symbol. Of the other virtual tracks, those that
have been recorded are indicated by “ ,” and those
that have not yet been recorded are indicated by “–.”
3
Press the [ENTER] key.
The “
●” symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
now be used for recording/playback.
Here’s how to edit the name of the virtual track currently
selected for the stereo track.
1
Call the TRACK screen View page by either
pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F1] key after pressing
the [TRACK] key.
2
Move the cursor to the TRACK field, and
use the [DATA/JOG] dial or the [INC]/[DEC]
keys to make it read “ST.”
You can edit the name of the virtual track that is cur-
rently enabled for the stereo track.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear, allow-
ing you to assign a name to the virtual track.
4
Edit the name of the virtual track, move the
cursor to the OK button, and press the
[ENTER] key. (For details on entering a
name
→ p. 32)
The edited name will be finalized.
• If the ST TR MODE ON/OFF button is ON, pressing the
[RECORD] key while the recorder is stopped will display a
popup window asking you to confirm that you want to defeat
stereo track playback mode. If you want to do so, move the
cursor to the OK button and press the [ENTER] key.
HINT
Switching the virtual track of the
stereo track
Editing the name of a virtual track
for the stereo track
TRACK field
RENAME button