Yamaha AW2400 - Manual (Page 94)

AW2400 Owner’s Manual
Finding a location while monitoring the sound (the Nudge function)
Tr
anspor
t/Locate Oper
ation
94
9
“Nudge” is a function that repeatedly plays a short region before or after the current location. By
using the Nudge function, you can find a precise location while listening to playback. This is use-
ful when you need to specify a location precisely, such as when specifying auto punch-in/out
points, or when editing the contents of a track.
1
Locate to the vicinity of the point you want
to find.
2
Press the [JOG ON] key while the transport
is stopped.
The [JOG ON] key will light, and the Nudge function
will be engaged. A fixed region (referred to as the
“nudge time”) starting at the current location will play
repeatedly.
3
To move the current location forward, turn
the [DATA/JOG] dial to the right. To move
the current location backward, turn the
[DATA/JOG] dial to the left.
If time display is selected as the counter display for-
mat, you can move the current location forward or
backward in millisecond units. If time code display is
selected, you can move in sub-frame units.
4
To turn off the Nudge function, press the
[JOG ON] key or the transport section
STOP [
■] key.
The [JOG ON] key indicator will go out, and the
Nudge function will be cancelled.
Finding a location while monitoring the sound (the Nudge function)
Current
location
Nudge time
Song
track
• You can use locate points or markers to change the location,
or register locate points or markers while using the Nudge
function.
• The nudge direction and time can be adjusted as required.
Refer to “AW2400 Preferences” on page 210 for details.
HINT