Playing an audio cd – Yamaha AW2400 User Manual
Page 222
AW2400 Owner’s Manual
Playing an audio CD
Creating an audio CD
222
22
The AW2400 CD Play function lets you play back a conventional audio CD or CD-R/RW media to
which audio data has been written via the CD-RW drive.
1
Call the CD screen Play page by either
pressing the Work Navigate section [CD]
key as many times as necessary, or by
pressing the [F2] key after pressing the
[CD] key.
In this page you can play back an audio CD inserted in
the CD-RW drive.
1 CD PLAY MODE button
Switches the CD Play function on/off.
B
INPUT CH MUTE/MIX button
Use this button to specify whether the signals from
input channels 1–16 will be output together with CD
playback (MIX button), or whether only the CD signal
will be output (MUTE button).
C
List
Displays the tracks on the audio CD that is inserted in
the CD-RW drive.
2
Insert the audio CD that you want to play
into the CD-RW drive.
3
Move the cursor to the CD PLAY MODE but-
ton and press the [ENTER] key.
The CD Play function will be activated, and the CD
track data will be read.
4
To play the CD tracks, press the PLAY [
]
key. To stop, press the STOP [
■] key.
During playback the audio output of the CD-RW drive
will be sent directly to the stereo output channel. Use
the STEREO fader to adjust the volume.
When the CD Play function is on, the transport section
keys have the following functions.
5
To exit the CD Play function, move the cur-
sor to the CD PLAY MODE button and press
the [ENTER] key.
Playing an audio CD
• The CD Play function can also be used to play mixed-mode CDs (tracks 2 and above)
and CD Extra CDs (1st session only).
• CD-R/RW discs can also be played prior to finalization.
HINT
A
B
C
Key
Operation
PLAY [
] key
Play
STOP [
■] key
Stop
REW [
] key/FF [
] key
Rewind/Fast-forward
[DATA/JOG] dial
Select tracks
(Press the [ENTER] key
to confirm the selection)
[
] key/[
] key
Select tracks
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the CD PLAY MODE but-
ton.
HINT
• The CD PLAY MODE button can be switched on/off only while
CD playback is stopped.
• While the CD PLAY MODE button is on, the CD-RW drive will
be locked and it will not be possible to eject the disc.
NOTE