Xerox 242 - Manual (Page 36)

28 Chapter 2 – Getting Started
4. In the Display Name box, type the new display name for the server.
5. Click Save.
The new name appears in the EZ Connect Setup window.
To delete a server:
1. In the EZ Connect window, click the Settings button , and select Setup from
the list.
2. In the list of servers, select the desired server.
3. Click Delete.
The server is removed from the list.
To refresh the status of the EZ Connect window:
¾ In the EZ Connect window, click the Refresh button .
To search for a job on a server:
1. In the EZ Connect window, click the Search button .
The Search Job window appears.
2. From the server list, select one of the following to search for the job:
• All Servers
• A specific server
3. In the blank white box, type the exact name of the job and then click Search.
The job appears in the Search Job window.