Xerox 242 - Manual (Page 22)

14 Chapter 2 – Getting Started
The Print Driver software also enables you to see the Xerox DocuColor
242/252/260 printer/copier configuration, monitor’s the printer status,
and save a set of print parameters for reuse.
Using the Print Driver Software
1. Open the file that you want to print—for example, a PDF file.
2. From the File menu, select Print.
3. In the Print dialog box, click Properties.
If this is the first time that you are using the Print Driver software, a
message tells you that the software is loading. Then a dialog box
appears with the print parameters.
Note: The job parameters available in the Print Driver software are the same
as the job parameters on your Spire CX260.
Note: The loading process might take a few minutes. Afterwards,
accessing the Print Driver software takes less time.